2024 Cub Cadet Ultima ZTX ZTX4 48
2024 Cub Cadet Ultima ZTX ZTX4 48
23 HP 725cc Kohler? KT-Pro 7000 series V-twin OHV engine built for reliable starting and a quiet operation
Dual hydrostatic transmissions allow for up to 8 MPH forward (up to 3.5 MPH reverse) ground speeds
A high-strength, continuous 1.5 in. x 3 in. tubular steel frame with fully e-coat lower frame and corrosion defense system, a multi-step process that electronically applies corrosion resistance with meticulous care to help protect against wear and tear
48 in. AeroForce? Max 10-Gauge reinforced fabricated steel cutting deck with maintenance spindles smooth arc triple-blades, cut overlap and deep dome deck design that is designed to provide excellent results, mows a wide area of grass is rust-resistant and helps provide your lawn with a clean, premium cut
Features may include:- Kohler 7000 Series PRO Engine
Smoother operation, better acceleration and seamless recovery powered by a reliable twin-cylinder Kohler engine.
- Rugged Frame
A rugged 1.5 x 3-inch tubular steel frame provides the strength needed for long-lasting use.
- AeroForce Max?
A 10-gauge steel fabricated AeroForce Max? deck with side, top and leading-edge reinforcements equips you with the right amount of strength for consistent cut quality.
- Hydro-Gear? ZT 3100 Transmissions
Dual hydrostatic transmissions allows you to reach speeds of up to 8 mph (3.5 mph in reverse) while providing effortless control and a smooth, zero-turn radius for the perfect pass.
- Enhanced Traction
Large Turf Master rear tires provide enhanced traction on uneven terrain with minimal grass damage
- Quick-Adjust Lap Bars
No tools needed to quickly adjust your zero-turn?s lap bars for your comfort or for different operators.
- High-Back Seat
A 20? premium high-back seat, cushioned armrests and a suspension system with polymer set isolators deliver a smoother ride than traditional seat springs.
- Dual LED Headlights
LED headlights come standard on every Ultima Series ZTX?, allowing you to see clearer in low-visibility conditions.
- Reduced Vibration
Mow in comfort with overmolded soft-touch hand grips and a rubber floor mat designed to reduce vibration and user fatigue.
- Easy Maintenance
Easily access the cutting deck pulleys and belts during maintenance and service intervals.
- Advanced Grass Collection
The AeroForce Max? deck top discharge allows for superior flow of grass through the large 9" diameter boot, directly up into the larger capacity bags.
Engine
- Displacement:725cc
- Engine:Model: Pro 7000 series | Model Number: KT730
Dimensions
- Fuel Capacity:5.5 gal. US (20.82 L)
- Oil Capacity:2.0 qts. US (1.89 L)
- Cutting Width:Deck: 48 in
- Lubrication:Fully pressurized
- Electrical:15 amp regulated
- Warranty:4-year 800 hours | Frame Warranty: Lifetime Limited | Deck Shell Warranty: Lifetime limited | Commercial Warranty: 4-year 800 hours
- Wheels:Anti-Scalping: Three gauge wheels
- Parking Brake:Lap Bar Integrated
- Governor:Mechanical
- Lighting:Headlight(s): Dual-LED
- Mainframe:1.5" x 3" tubular steel
- Choke:Separate Choke
- Features:Deck Engagement (PTO): Electric | Deck Construction: Fabricated | Blade(s): Three | Deck Lift: Foot pedal with Dial Adjust | Deck Positions: 17 | Rear Tow Hitch: Yes | Corrosion Protection: Yes | Tire Tread: Turf Master / Multi Trac | Series: Ultima Series? ZTX | Model Number: 47ASAAA6010
- Brake System Type:Disc
- Air Filter:Dual element
- Oil Filter:Yes
- Engine Manufacturer:Kohler?
- Cylinder Liners:Twin
- Operating Speed:Forward: 8 MPH /12.9 km/h | Reverse: 3.5 MPH / 5.6 km/h
- Height:Cutting Range: 1" - 4.75"
- Drive system:Hydrostatic
- Construction Material, Deck:10-gauge steel with 2-gauge reinforcement
- Battery Charger Type:AGM (Absorbent Glass Mat)
- Engine Power:Output: 23HP
- Steering:Lap Bars
- Starter:Electric | Ignition Key
- Seat Type:20" high back | Seat Adjustment: Lever
- Tires, Front Specification:13"x 6.5"-6"
- Tires, Rear Specification:22"x 12"-12"
- Battery:210 CCA | Voltage: 12V
Other
- Manufacturer Type:Zero-Turn Mower
