2023 SCAG Power Equipment Industrial Tow-Behind TLB25-37CH
2023 SCAG Power Equipment Industrial Tow-Behind TLB25-37CH
LEAVE THE REST. GET THE BEST.When the best demand the best, it’s time for the toughest and most powerful: the Scag® Industrial Tow-Behind Truck Loader. No matter the job—from landscaping and municipal operations to golf courses—this machine features the commercial-grade size and performance needed to get the job done. Leave the rest behind and work with the best.
Features may include:4-Blade Impeller
FABRICATED AND BALANCED, 25-INCH, 4-BLADE IMPELLER
- Within the unit’s 10.5"-wide housing is a welded-steel impeller with 1/2"-thick steel blades. Dynamically balanced for reduced vibration, longer life and less stress on the engine, these loaders boast an effective, high-output (35BV = up to 6,781 CFM; 37CH = up to 6,909 CFM; 49KBD = up to 7,318 CFM), debris-reducing design.
Smart Construction and Convenient Serviceability
EASY ACCESS FOR WEAR PLATE AND IMPELLER SERVICE
- 1/4"-thick, bolt-in, replaceable wear liner extends service life. Removable rear-housing cover allows easy access to impeller and wear plates.
Locking Boom Arm and Intake Nozzle
SAFE AND CONVENIENT TRANSPORT
- Transport lock safely secures the boom arm and hose when not in use; nylon bearing delivers smooth movement. A transport pin locks the nozzle to the loader to help protect the hose during transportation.
Ambidextrous Nozzle Handle
EASY HANDLING FROM EITHER SIDE: THE CHOICE IS YOURS
- Padded, large-diameter handle is designed for increased leverage and easy maneuverability.
16" Steel Intake Nozzle
TAKE IT ALL IN
- HUGE, replaceable intake nozzle makes debris pickup easy.
Adjustable Tongue and Hitch
FIT TO YOUR TRUCK – LONG OR SHORT, HIGH OR LOW
- Choose from three different tongue lengths to best fit your specific application. A height-adjustable hitch gives the best fit your truck. A 2 5/16" ball coupler comes standard on gas-powered units, but will accept a pintle hitch. Diesel-powered unit comes with standard pintle hitch, but will accept a 2 5/16" ball coupler.
Built-In Tool Holder
KEEP YOUR RAKES, BROOMS AND SHOVELS WITHIN EASY REACH
- Built-in, 3-hole tool holder with rubber rings protects handles from damage.
Large-Capacity Fuel Tank With Built-In Gauge
HOURS AND HOURS OF RUN TIME
- High-capacity, 8.5-gallon, steel fuel tank with large filler neck for easy filling keeps you on the job. Built-in fuel gauge adds convenience and eliminates guesswork.
Ultra-Powerful Engine Options
HUGE POWER, UP TO 49 HP
- Choose from a 35 hp Vanguard® BIG BLOCK' or a 37 hp Kohler® Command PRO® EFI gasoline engine, or a 49 hp Kubota® diesel engine.
Engine
- Engine:Kohler® Command PRO®, V-Twin, electric start
Dimensions
- Fuel Capacity:8.5 gallons
- Weight:1,700 lb
- Impeller diameter:25"
- Intake Design:84" length, 16"-diameter intake hose, 0.045 blue polyurethane rubber, wire helix with wearstrip
- Throttle:Commercial-grade, all-steel mechanicals
- Width:Trailer: 66.75" | Impeller: 9" | Blower Housing: 10.5"
- Features:Highway Ready: Yes – standard roadside package, including wheel chocks and cones | Unit Mounting: Hitch: at least 10,000 lb rating | Blower Housing Wear Plates: Standard: 1/4"-steel, replaceable | Blower Housing Construction: Removable back panel for easy impeller and wear plate access | CFM Output: 6,909
- Discharge Type:Clear thermoplastic, 12" diameter, 84" length
- Height:121.25"
- Axle Capacity, Rear:Heavy-duty Dexter Torflex® axle (3,500 lb)
- Engine Power:37 HP
- Tank Type:plastic tank with built-in fuel gauge
- Frame Type:All-steel, welded
- Tires, Rear Specification:205 / 75 D15 highway tires with steel wheels
- Impeller:4-blade, 1/2"-thick blades, all-steel, welded | Mounting: Straight bore
Other
- Manufacturer Type:General
