2023 Exmark Lazer Z S-Series EFI LZS749AKC524A2
2023 Exmark Lazer Z S-Series EFI LZS749AKC524A2
With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut' Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features may include:
Eco-Friendly- Reduces fuel consumption, fewer emissions and carbon footprint.
- Delivers up to 25% in fuel savings.
- Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
- Easy start in any altitude or climate condition (no manual choke).
- Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Engine
- Displacement:747
- Fuel system:Indicator: Electronic Sender
Dimensions
- Fuel Capacity:12-gallon (45.4-L)
- Weight:Curb: 1136
- Length:Blades: 3 Blades at 20.50" | 79.2 in. (201.2 cm)
- Dimensions:Casters: .50" thick caster yoke arms.
- Emissions:Series: Command™ EFI
- Cutting Width:Deck: 72"
- Electrical:12-volt battery with 20-amp alternator.
- Parking Brake:Lever-actuated disc brake.
- Width:64.8 in. (164.6 cm)
- Air Filter:Heavy-duty canister air filtration system
- Safety Features:Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Engine Manufacturer:Kohler ECV749
- Operating Speed:Forward: 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- Height:Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70.5 in. (179.1 cm)
- Construction Material, Deck:Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- Drivetrain:Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Rated Engine Speed:3,750 RPM
- PTO Type:Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Steering:Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Seat Type:Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- FUEL TYPE:Gas EFI
- Frame Type:Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Tires, Front Specification:23 x 9.50-12, 4 ply Super Turf® | Caster: 13 x 5.0-6, smooth-tread, semi-pneumatic.
- Tires, Rear Specification:24 x 12-12, 4 ply Turf Master®
- Top Speed:Blade: Approximately 18,500 fpm.
- Spindle Diameter:Cutter Housing: 7.75" | Shaft: 25mm(.98")
Other
- Manufacturer Type:Zero-Turn Mower
