2022 Exmark Lazer Z S-Series EFI LZS749AKC724A1

Check Availability Hi, my name is and I'm interested in this 2022 Exmark Lazer Z S-Series EFI LZS749AKC724A1 . I'm in the area and you can reach me at or on my phone at .

2022 Exmark Lazer Z S-Series EFI LZS749AKC724A1

With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut' Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features may include:

Eco-Friendly
  • Reduces fuel consumption, fewer emissions and carbon footprint.
Reduce Green House Gases
  • Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Engine Efficiency
  • Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Fuel Savings
  • Delivers up to 25% in fuel savings.
Easy to Start
  • Easy start in any altitude or climate condition (no manual choke).
Sequential Fuel Injection
  • Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.

Engine

  • Displacement:
    747
  • Fuel system:
    Indicator: Electronic Sender

Dimensions

  • Fuel Capacity:
    12-gallon (45.4-L)
  • Weight:
    Curb: 1305
  • Length:
    Blades: 3 Blades at 24.50" | 86.1 in. (218.7 cm)
  • Dimensions:
    Casters: .50"

  • Emissions:
    Series: Command™ EFI
  • Cutting Width:
    Deck: 72"
  • Electrical:
    12-volt battery with 20-amp alternator.
  • Parking Brake:
    Lever-actuated disc brake.
  • Width:
    84.9 in. (215.6 cm)
  • Air Filter:
    Heavy-duty canister air filtration system
  • Safety Features:
    Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Engine Manufacturer:
    Kohler
  • Operating Speed:
    Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
  • Height:
    Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
  • Construction Material, Deck:
    Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Drivetrain:
    Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Rated Engine Speed:
    3,750 RPM
  • PTO Type:
    Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Steering:
    Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Seat Type:
    Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • FUEL TYPE:
    Gas EFI
  • Frame Type:
    Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Tires, Front Specification:
    24 x 12-12, 4 ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Tires, Rear Specification:
    24 x 12-12, 4 ply Turf Master®
  • Top Speed:
    Blade: Approximately 18,500 fpm.
  • Spindle Diameter:
    Cutter Housing: 7.75" | Shaft: 25mm(.98")

Other

  • Manufacturer Type:
    Zero-Turn Mower

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234