2021 Wacker Neuson Telehandlers TH627

2021 Wacker Neuson Telehandlers TH627

The TH627 ground-engaging telehandler offers a three-in-one machine concept that provides maximum versatility. Designed with a hydraulic skid steer plate, it delivers the digging capabilities of a wheel loader, the attachment versatility of a skid steer and the performance of a leading telehandler with a lift height of 18 ft. 10 in. and 5,500 lbs. of lifting capacity. The load management system maximizes performance by automatically adjusting the position of the load to increase cycle times and minimize tipping situations.

Features may include:

• Three steering modes (four-wheel, two-wheel and crab steering) provide maximum maneuverability in any operating environment

• Two operator platforms are available: pressurized enclosed cab with air conditioning and heat and open canopy ROPS (rollover protection system)

• Ergonomic features include wide door for easy entry/exit, controls and multifunctional joystick are intuitive and illuminate to make selecting features easy under any lighting condition, 360° visibility of the job site and excellent line of sight to the attachment

• Diesel Oxidation Catalyst (DOC) aftertreatment requires no diesel particulate filter, no regeneration and no maintenance

• Convenient service and maintenance access reduces downtime and significantly shortens daily maintenance checks

• When traveling around the job site or for tight maneuvers, the Wacker Neuson telehandler makes easy work out of material handling with its standard three steering options.

• particularly maneuverable due to its 2 x 40 degree steering angle.

• familiar handling even when driving quickly on the road.

• ideal for parallel travel and maneuvering in the tightest spaces and along buildings.

• Maximize cycle times, minimize tipping situations — the Load Management System (LMS) improves performance by automatically adjusting the position of the load.

• The bucket mode is used for loading and unloading material with a bucket and operating in an area where space is not confined. When raising the load in bucket mode, boom functions are controlled manually by the operator. When the boom is lowered, the LMS automatically retracts the telescopic arm to keep the load as close to the front axle as possible. While the boom is being retracted, the arm will lower at a reduced speed. Once the boom is fully retracted, the boom will resume lowering at normal speed. By managing the load in this fashion, bucket mode decreases the chances of tipping, as well as reducing the number of functions required by the operator to complete a task.

• When the fork mode (also known as stacking mode) is selected, the telescopic arm works to maintain the load in a vertical plane when raising and lowering the attachment. When raising the boom in fork mode, the LMS raises and telescopes out at the same time, keeping the load on a vertical plane. This eliminates the need for the operator to self-adjust the load in a tight situation. When lowering the boom in fork mode, the LMS retracts and lowers at the same time, keeping the load on the same vertical plane. This makes fork mode the ideal choice for stacking and unstacking materials and for operating in a confined space.

• The machines can be pushed to their tip limits purely when lowering.

• Virtually vertical movement. Hardly any load torque shift in the longitudinal direction of the machine.