2021 Virnig Manufacturing V60 V-Snow Blade SBV84
2021 Virnig Manufacturing V60 V-Snow Blade SBV84
Hydraulic only control makes variable V, scoop, straight and angled positions possible. The scoop position allows the operator to push and pile snow, and the V position cuts through the deepest piles and drifts.
FLOATING FRAME LINKMaintains full blade contact in scoop and V positions, while allowing full down pressure in straight and angled positions.
SIDE-TO-SIDE OSCILLATIONAllows the blade to maintain constant contact with uneven surfaces.
HYD. SEQUENCE RELIEF VALVESHelp protect the attachment by transferring shock from one wing to another when curbs or objects are hit.
TRIP EDGE PROTECTIONProtects operator and equipment.
TWO BOLT-ON EDGES5/8" x 8" reversible, replaceable steel edges allow 5 1/2" of total wear.
Dimensions
- Weight:Approximate (Pounds): 1240
- Dimensions:Cylinder Pins / Hinge Pins Diameter (Inches): 1.25 / 1.563 | Blade Angle (Degrees): +/- 30 | Blade Oscillation (Degrees): +/- 4 | Cylinder Bore / Stroke (Inches): 2.0 / 8.375
- Width:Full Scoop / Full V (Inches): 70.0 / 76.0
- Overall Width:Straight / Full Angle (Inches): 86.0 / 74.0
- Height:Blade (Inches): 31.0
- Cutting Edge Quantity:Cutting / Center (Inches): 5/8 x 8 Bolt-on
- Load Capacity, Land:Recommended: Greater than 1500
- Moldboard Thickness:(Inches): 0.19
Other
- Manufacturer Type:Implement / Attachment
