2021 Virnig Manufacturing V60 Hydraulic Snow Blade/Pusher HSBP144
2021 Virnig Manufacturing V60 Hydraulic Snow Blade/Pusher HSBP144
Variable pusher, straight, and angled positions allow optimal snow removal. Electric control enables independent angling of each wing. The entire blade also angles separately from the wings for countless blade and wing angle configurations.
FLOATING FRAME LINKMaintains full blade contact when wings are angled, while allowing full down pressure when wings are straight.
SIDE-TO-SIDE OSCILLATIONAllows the blade to maintain constant contact with uneven surfaces.
PRESSURE RELIEF VALVESHelp protect the attachment by angling the entire blade when curbs or objects are hit.
TRIP EDGE PROTECTIONMain blade and Wing trip edges protect operator and equipment.
THREE BOLT-ON EDGESReplaceable steel edges allow 5 1/2" of total wear.
Dimensions
- Weight:Approximate (Pounds): 1650
- Dimensions:Cylinder Pins / Hinge Pins Diameter (Inches): 1.25 / 1.563 | Cylinder Bore / Stroke (Inches): 2.0 / 8.375 | Float Link Angle (Degrees): +/- 5 | Angle: Blade / Wing (Degrees): +/- 30 / +/- 60 | Blade Oscillation (Degrees): +/- 4
- Width:Main Moldboard (Inches): 86.0 | at Full Scoop (Inches): 107.0 | at Full Angle Both Wings Open (Inches): 131.0 | at Full Angle One Wing Open (Inches): 120.5
- Overall Width:Straight (Inches): 148.5
- Cutting Edge Quantity:Main / Wing (Inches): 5/8 x 8 Bolt-on / 1/2 x 7 3/4 High Tensile Steel, Bolt-on
- Load Capacity, Land:Recommended: Greater than 1800 pounds
- Overall Height:(Inches): 31.0
- Moldboard Thickness:(Inches): 0.19
Other
- Manufacturer Type:Implement / Attachment
