2021 Exmark Turf Tracer X-Series TTX650EKC60400
2021 Exmark Turf Tracer X-Series TTX650EKC60400
By virtually any measure, the Turf Tracer X-Series represents the definitive, full-featured hydro mower. Whether you choose the 52- or 60-inch cutting deck, the UltraCut' Series 4 with splined spindle blade driver is up to the toughest jobs. As are the X-Series engines—Kohler® EFI, Kawasaki® and Kohler EFI Propane. Ground speeds up to 6.75 mph, and up to 2.25 in reverse, also rank the Turf Tracer X-Series among the most productive mowers in its class.
Features may include:
Patented Enhanced Control System (ECS)- Recent university tests showed landscape professionals prefer our control system to all others on the market.
- Full-floating UltraCut' deck. Side discharge standard, with molded discharge chute and option to bag or mulch.
- A large-capacity, electromagnetic PTO clutch provides excellent durability for extra-long life.
- With the Turf Tracer X-Series, you can choose up to a 60-inch deck.
- An eco-friendly, lower cost fuel reduces operating expenses versus typical gas-powered mowers.
- This series comes standard with heavy-duty canister air filtration systems for longer engine life, more efficient performance and simple maintenance.
- UltraCut' Series 4 deck
Engine
- Displacement:694
- Fuel system:Electronic Fuel Injected
Dimensions
- Fuel Capacity:5-gallon (18.9-L)
- Weight:Curb: 760
- Length:Blades: 3 Blades at 20.5" | 84.8 in.
- Dimensions:Casters: .38"
- Emissions:Series: Command™ EFI
- Cutting Width:Deck: 60"
- Electrical:12-volt battery with 20-amp alternator.
- Parking Brake:Lever-actuated mechanical compression.
- Width:73.0 in.
- Air Filter:Heavy-duty canister air filtration system
- Safety Features:Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- Engine Manufacturer:Kohler
- Operating Speed:Forward: 0– 6.75 mph (10.9 kmph) | Reverse: 0–2.25 mph (3.6 kmph)
- Height:Cutting: 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 45.0 in.
- Construction Material, Deck:Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
- Drivetrain:Hydro-Drive | Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts.
- Rated Engine Speed:3,600 rpm
- PTO Type:Engagement: Electromagnetic 200 ft-lbs clutch.
- Steering:Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- FUEL TYPE:Gas EFI
- Tires, Front Specification:18 x 8.5-8, 4-ply Turf Master® | Caster: 11 x 4.0-5, smooth tread, semi-pneumatic.
- Tires, Rear Specification:18 x 8.5-8, 4-ply Turf Master®
- Top Speed:Blade: Approximately 18,500 fpm.
- Spindle Diameter:Cutter Housing: 7.75" | Shaft: 25mm (.98")
Other
- Manufacturer Type:Walking
