2021 Exmark Radius S-Series Rear Discharge RAS730GKA60RA3
2021 Exmark Radius S-Series Rear Discharge RAS730GKA60RA3
The Radius rear discharge zero-turn mower comes with a UltraCut Rear Discharge deck. A 60” cut-width means you can cut more, quickly, while keeping clippings under control. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph fwd. ground speed. The Radius S-Series improves productivity and provides maximum comfort
Features may include:
Radius Rear Discharge Deck- Available in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.
- Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
- The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
- Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
- Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Engine
- Displacement:726
- Fuel system:Fuel Indicator: Translucent Visual
Dimensions
- Fuel Capacity:7-gallon (26.5-L)
- Length:Blades: 3 Blades at 20.50" | 84.3 in (214.1 cm)
- Dimensions:Casters: .375" thick caster yoke arms
- Emissions:Series: V-Twin
- Cutting Width:Deck: 60"
- Electrical:12-volt battery with 15-amp alternator.
- Parking Brake:Lever-actuated pawl brake.
- Width:66.0 in (167.6 cm)
- Air Filter:Donaldson Heavy Duty air cleaner
- Safety Features:Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Engine Manufacturer:Kawasaki
- Operating Speed:Forward: 0–9.0 mph (14.5 kmph) | Reverse: 0–5.0 mph (8.0 kmph)
- Height:Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments | 70.2 inches (178.3 cm)
- Construction Material, Deck:Style: Floating | Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch. | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
- Drivetrain:Hydro-Drive | Description: Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
- Rated Engine Speed:3700 rpm
- PTO Type:Engagement: MagStop electromagnetic 125-ft-lb clutch
- Steering:Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Seat Type:High back seat with foam padded seat cushion, armrests and integral safety switch
- FUEL TYPE:Gas Carbureted
- Frame Type:Tractor: Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
- Tires, Front Specification:23 x 10.5-12 Super Turf (142-4266) | Caster: 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
- Tires, Rear Specification:23 x 10.5-12 Super Turf (142-4266)
- Top Speed:Blade: Approximately 18,500 fpm.
- Spindle Diameter:Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
Other
- Manufacturer Type:Zero-Turn Mower
