2021 Exmark Lazer Z X-Series LZX921GKA606A1
2021 Exmark Lazer Z X-Series LZX921GKA606A1
With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it's now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut' Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
Features may include:
Patented RED Technology- Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
- Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
- Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
- This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
- Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
- Deck and hydro belt can be installed without using any tools.
Engine
- Displacement:999
- Fuel system:Fuel Indicator: Electronic Sender
Dimensions
- Fuel Capacity:12-gallon (45.4-L)
- Weight:Curb: 1246
- Length:Blades: 3 Blades at 20.50" | 83.1 in. (211.1 cm)
- Dimensions:Casters: .50" thick caster yoke arms.
- Emissions:Series: V-Twin
- Cutting Width:Deck: 60"
- Electrical:12-volt battery with 15-amp alternator.
- Parking Brake:Lever-actuated disc brake.
- Width:72.8 in. (184.9 cm)
- Air Filter:Heavy-duty canister air filtration system
- Safety Features:Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Engine Manufacturer:Kawasaki FX921V
- Operating Speed:Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
- Height:Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) | 70.5 in. (179.1 cm)
- Construction Material, Deck:Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Deck Style: Floating Deck | Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- Drivetrain:Hydro-Drive| Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
- Rated Engine Speed:3,750 RPM
- Engine Power:31 HP
- PTO Type:Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
- Steering:Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Seat Type:Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- FUEL TYPE:Gas Carbureted
- Frame Type:Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Tires, Front Specification:24 x 12.0-12, NPT Tractus® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
- Tires, Rear Specification:Unibody, welded, heavy-duty 1.5" x 3" tubular steel.24 x 12.0-12, 4-ply Turf Master®
- Top Speed:Blade: Approximately 18,500 fpm.
- Spindle Diameter:Blade Cutter Housing: 7.75" | Blade Shaft: 30mm (1.18")
Other
- Manufacturer Type:Zero-Turn Mower
