2020 Honda Power Pumps WMP20

Check Availability Hi, my name is and I'm interested in this 2020 Honda Power Pumps WMP20 . I'm in the area and you can reach me at or on my phone at .

2020 Honda Power Pumps WMP20

Features may include:

  • Multi-purpose 2" pump
  • Designed for pumping industrial and agricultural chemicals
  • Easy starting Honda OHV commercial engine
  • 220 gal./min capacity
  • Thermoplastic pump housing for chemical capability
Designed for pumping industrial and agricultural chemicals
  • See the applications tab for approved chemical applications.
EPDM seals for chemical resistance
  • The WMP20 features EPDM seals, a type of rubber material that is designed to be compatible with a wide range of chemicals.
Easy starting Honda OHV commercial engine
  • The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • 220 gal./min capacity
Thermoplastic components for chemical capability
  • The WMP20's reinforced thermoplastic housing, volute & impeller improve chemical resistance.
Heavy duty full frame protection
  • Protects the pump, while offering a convenient tie down location for transport.
Isolation mounted engine and pump
  • High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protected by Honda Oil Alert®
  • Protects the pump by shutting the engine off when low oil is detected.
3 year residential/commercial warranty
  • You can rest easy, knowing your pump is covered from top to bottom for 3 full years.

Engine

  • Displacement:
    163cc
  • Engine:
    GX160
  • Bore:
    2.7"
  • Stroke:
    1.8"

Dimensions

  • Fuel Capacity:
    0.82 gal
  • Length:
    20.5"
  • Dimensions:
    Suction port diameter: 2" NPT | Discharge port diameter: 2" NPT

  • Dry Weight:
    57 lb.
  • Pump type:
    Multi-purpose Centrifugal Self-priming
  • Warranty:
    Residential: 3 years | Commercial: 3 years
  • Run Time Per Tankful:
    Run Time @ Max Discharge: 1.5 hr
  • Width:
    15.7"
  • Features:
    Oil Alert: Std | Strainer Part #: 78325-YE0-003
  • Construction Material:
    Volute: Rigid Mounted Fiberglass reinforced polyester | Impeller: Fiberglass reinforced polyester | Mechanical Seal (Pump case / impeller): Carbon/Ceramic
  • Discharge Capacity:
    220 gals./min.
  • Operating Speed:
    Priming time: 65 sec. @ 16.4 ft.
  • Height:
    17.7"
  • Drive system:
    Direct
  • Lift Height:
    Total head lift: 102 ft. | Suction head lift: 26 ft.
  • Compression Ratio:
    9.0:1
  • Maximum Pressure:
    44 psi

Other

  • Manufacturer Type:
    General

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234