2020 Exmark Staris S-Series EFI STS650AKC48400

Check Availability Hi, my name is and I'm interested in this 2020 Exmark Staris S-Series EFI STS650AKC48400 . I'm in the area and you can reach me at or on my phone at .

2020 Exmark Staris S-Series EFI STS650AKC48400

When you need maximum power and productivity from your stand-on mower, Staris S-Series with EFI have you covered.  Get the maneuverability of a zero-turn rider in a more compact size. State-of-the-art Kohler EFI commercial engines deliver the power to tackle any job, at ground speeds up to 10 mph, and offer reduced fuel consumption. Proven hydro pumps and wheel motors use hard plastic lines instead of rubber hoses, for increased durability and reliability, with optimized routing. Available in 52- or 60-inch cut widths, UltraCut Series 4 side-discharge cutting decks deliver a signature cut quality, with the ability to easily mulch or bag clippings when properly equipped. The suspended operator platform increases operator comfort in-use, with the ability to quickly fold the platform up to decrease trailering space, or use the machine as a walk-behind mower.

Features may include:

Cut Quality

Available in a variety of deck widths, Staris S-Series features proven Exmark UltraCut Series 4 decks providing unmatched performance and Exmark's legendary quality of cut.

Height of Cut

The height of cut system was developed for operators to quickly and accurately change the cut height by simply raising and lowering the deck.

Drive System

The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.

Smart Controller

The intuitive Smart Controller reduces downtime with maintenance reminders and on-screen machine health diagnostics along with an enhanced interlock display with both engine and PTO hour displays.

Operator Position

The large, open platform comfortably positions operators between the drive tires, making them feel integrated into the machine, while also allowing them to get on and off the machine quickly and efficiently.

Serviceability

The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.

Engine

  • Displacement:
    694
  • Engine:
    Model: CV650 | Spec:3020
  • Fuel system:
    Electronic Fuel Injected | Indicator: Float Gauge

Dimensions

  • Fuel Capacity:
    10-gallon (37.9-L)
  • Weight:
    Curb: 960
  • Length:
    Blades: 3 Blades at 16.25" | 69.3" (176.0 cm)
  • Dimensions:
    Casters: .50

  • Emissions:
    Series: Command™ EFI
  • Cutting Width:
    Deck: 48"
  • Electrical:
    12-volt battery with 15-amp alternator.
  • Wheels:
    Drive Release: Allows unit movement without engine running.
  • Parking Brake:
    Lever-actuated bar brake.
  • Width:
    59.6" (151.4 cm)
  • Air Filter:
    Heavy-duty canister air filtration system
  • Safety Features:
    Package: Operator Presence Controls (OPC) with safety interlock system indicators
  • Engine Manufacturer:
    Brand: Kohler
  • Operating Speed:
    Forward: 0–10.0 mph (12.9 kmph) | Reverse: 0–4.0 mph (6.4 kmph)
  • Height:
    Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments | 46.7" (118.6cm)
  • Construction Material, Deck:
    Style: Floating Deck | Style Description:  Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
  • Drivetrain:
    HYDRO | Description: Two Hydro Gear 12 cc pumps powering two Parker 12 cubic inch motors.
  • Rated Engine Speed:
    3,600 rpm
  • PTO Type:
    Engagement: Warner 175 ft-lb clutch
  • Steering:
    Control: Twin levers with adjustable front reference bar to modify forward ground speed.
  • Frame Type:
    Tractor: Welded, heavy-duty 1.5" x 3" tubular steel.
  • Tires, Front Specification:
    23x8.50-12 Carlisle Turf Master | Caster: 12 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
  • Tires, Rear Specification:
    23x8.50-12 Carlisle Turf Master
  • Top Speed:
    Blade: Approximately 18,500 fpm.
  • Spindle Diameter:
    Cutter Housing: 7.75" | Blade Driver: 1.75" | Shaft: 1.0"

Other

  • Manufacturer Type:
    Stand-On

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234