2020 Exmark Lazer Z S-Series EFI LZS850EKA724W0
2020 Exmark Lazer Z S-Series EFI LZS850EKA724W0
With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut' Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features may include:
Eco-FriendlyReduces fuel consumption, fewer emissions and carbon footprint.
Reduce Green House GasesFuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Engine EfficiencyClosed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Fuel SavingsDelivers up to 25% in fuel savings.
Easy to StartEasy start in any altitude or climate condition (no manual choke).
Sequential Fuel InjectionDelivers the precise amount of fuel and spark where needed to maximize efficiency and power.
Engine
- Displacement:852
- Engine:Model: FX850VC | Spec: AS45/AS49
- Fuel system:Indicator: Electronic Sender
Dimensions
- Fuel Capacity:12-gallon (45.4-L)
- Weight:Curb:
- Length:Blades: 3 Blades at 24.50" | 86.1 in. (218.7 cm)
- Dimensions:Casters: .50"
- Emissions:Series: V-Twin EFI
- Cutting Width:Deck: 72"
- Electrical:12-volt battery with 30-amp alternator.
- Wheels:Release: Allows unit movement without engine running.
- Parking Brake:Lever-actuated disc brake.
- Width:84.9 in. (215.6 cm)
- Air Filter:Heavy-duty canister air filtration system
- Safety Features:Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Engine Manufacturer:Brand: Kawasaki
- Operating Speed:Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
- Height:Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
- Construction Material, Deck:Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- Drivetrain:Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Rated Engine Speed:3,750 RPM
- PTO Type:Engagement: MagStop electromagnetic 250-ft-lb clutch with spot brake
- Steering:Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Seat Type:Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- FUEL TYPE:Gas EFI
- Frame Type:Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel
- Tires, Front Specification:24 x 12-12, 4 ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
- Tires, Rear Specification:24 x 12-12, 4 ply Turf Master®
- Top Speed:Blade: Approximately 18,500 fpm.
- Spindle Diameter:Cutter Housing: 7.75" | Shaft: 25mm (.98")
Other
- Manufacturer Type:Zero-Turn Mower
