2020 Exmark Lazer Z E-Series LZE742GKC604A3
2020 Exmark Lazer Z E-Series LZE742GKC604A3
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command' EFI engine matched to a full-floating, UltraCut' Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.
Features may include:
Hydro Drive, SimplifiedOur hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
Less Time At The PumpGas-powered E-Series models have a single 8-gallon tank with one fill location.
Fewer Grease PointsWith just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
Rear Discharge DeckAvailable in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
Unibody FrameOur one-piece body frame is a classic case of less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of less is way more.”
On-Board DiagnosticsCheck vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
Ultracut Series 4 DeckThis full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
Tool-less Belt RemovalDeck and hydro belt can be installed without using any tools.
Engine
- Displacement:747
- Engine:Model: CV742 | Spec: 3037
- Fuel system:Fuel Indicator: Electronic Sender
Dimensions
- Fuel Capacity:8-gallon (30.3-L)
- Weight:Curb: 1147
- Length:Blades: 3 Blades at 20.50" | 83.1 in. (211.1 cm)
- Dimensions:Casters: .50" thick caster yoke arms.
- Emissions:Series: Command™
- Cutting Width:Deck: 60"
- Electrical:12-volt battery with 15-amp alternator.
- Wheels:Drive Release: Allows unit movement without engine running.
- Parking Brake:Lever-actuated disc brake.
- Width:72.8 in. (184.9 cm)
- Air Filter:Heavy-duty canister air filtration system
- Safety Features:Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Engine Manufacturer:Brand: Kohler
- Operating Speed:Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
- Height:Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments | 70 in. (177.8 cm)
- Construction Material, Deck:Style: Floating | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- Drivetrain:Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Rated Engine Speed:3,750 rpm
- PTO Type:Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Steering:Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Seat Type:Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
- Frame Type:Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Tires, Front Specification:24 x 12-12, 4 ply Super Turf® | Caster: 13 x 6.50-6, smooth-tread, pneumatic.
- Tires, Rear Specification:24 x 12-12, 4 ply Super Turf®
- Top Speed:Blade: Approximately 18,500 fpm.
- Spindle Diameter:Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
Other
- Manufacturer Type:Zero-Turn Mower
