2019 Barreto Stump Grinder 30SGB

RENTAL UNIT

Check Availability Hi, my name is and I'm interested in this 2019 Barreto Stump Grinder 30SGB - RENTAL UNIT . I'm in the area and you can reach me at or on my phone at .

2019 Barreto Stump Grinder 30SGB

DESIGN

An offshoot of the dependable TK track trencher, the 30SG stump grinder features a variant of the same time-tested track drive platform used by the TK series. The 30SG has a hydraulically-driven cutter wheel that is raised and lowered into the stump and then moved from side to side to cut down. The 30SG is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to two gear pumps: the larger gear pump drives the cutter wheel and the smaller pump works the tilt and swing cylinders. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope.

CONTROLS

The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.

ROI

All hydraulic drive to the cutter wheel eliminates costly belts. It also increases customer satisfaction by ensuring there is no loss of power because of a damaged belt or mechanical component. The track drive increases maneuverability around the job site, creating customer satisfaction by allowing them to get the job done with increased efficiency.

  • Status:
    New
  • Vehicle:
    2019 Barreto Stump Grinder 30SGB
  • Location:
    Wise Honda
  • Warranty:
    Manufacturer's

OTHER SPECS

  • Depth, Maximum:
    Cutting Depth
  • Dimensions:
    Head Swing
  • Engine Power:
    31 HP
  • Engine:
    Briggs Vanguard 31HP V-Twin
  • Height:
    49.5" | Cutting
  • Length:
    Length (head to side)
  • Teeth Diameter:
    0.750"
  • Teeth per Wheel:
    16
  • Weight:
    1700 lbs
  • Width:
    35.5" | Track

Our Location

Wise Honda
2803 S US-287
Decatur, TX 76234

TALONS ARE ONLY FOR DRIVERS 16 YEARS AND OLDER. MULTI-PURPOSE UTILITY VEHICLES (SIDE-BY-SIDES) CAN BE HAZARDOUS TO OPERATE. FOR YOUR SAFETY, DRIVE RESPONSIBLY. ALWAYS WEAR A HELMET, EYE PROTECTION, APPROPRIATE CLOTHING AND READ THE OWNER’S MANUAL BEFORE OPERATING THE VEHICLE. ALWAYS WEAR YOUR SEAT BELT, AND KEEP THE SIDE NETS AND DOORS CLOSED. NEVER DRIVE AFTER CONSUMING DRUGS OR ALCOHOL, OR ON PUBLIC ROADS. DRIVER AND PASSENGERS MUST BE TALL ENOUGH FOR SEAT BELT TO T PROPERLY AND TO BRACE THEMSELVES WITH BOTH FEET RMLY ON THE OOR. PASSENGER MUST BE ABLE TO GRASP THE GRAB BAR WITH THE SEAT BELT ON AND BOTH FEET ON THE OOR. RESPECT THE ENVIRONMENT WHEN DRIVING. Talon® is a registered trademark of Honda Motor Co., Ltd. ©2023 American Honda Motor Co., UTILITY ATVS ARE RECOMMENDED FOR RIDERS 16 YEARS AND OLDER. ATVS CAN BE HAZARDOUS TO OPERATE. FOR YOUR SAFETY, BE RESPONSIBLE. READ THE OWNER’S MANUAL. ALWAYS WEAR A HELMET, EYE PROTECTION AND PROTECTIVE CLOTHING. BE CAREFUL ON DIFFICULT TERRAIN. NEVER RIDE AFTER CONSUMING DRUGS OR ALCOHOL, ON PAVED SURFACES, ON PUBLIC ROADS, WITH PASSENGERS, OR AT EXCESSIVE SPEEDS. NO STUNT RIDING. RESPECT THE ENVIRONMENT WHEN RIDING. FourTrax®, Foreman®, Phantom Camo®, Honda Pro ConnectTM and Electric Shift Program® (ESP) are registered trademarks of Honda Motor Co., Ltd. ©2022 American Honda Motor Co., Inc.